Copyright © 2019 Martin Audio Ltd.
41
WPS USER GUIDE V1.0
WPS USER GUIDE
Fit the ground-stack bar into the appropriate hole in the central spine of the flying frame. Note that the orientation of the bar and the
correct hole to use in the frame will be determined by the angle of the first WPS cabinet in the stack and will be calculated by the DISPLAY
project.
Remove the link pins and lower the WPS cabinet onto the frame until the two up-right bars on the frame locate in the front rigging assembly
of the WPS. Insert the link pins in the WPS rigging assembly to secure the front rigging system.
Remove the lock pins from the rigging assembly and raise the link bar. Replace the lock pins to hold the bars in the up position.
