![background image](http://html.mh-extra.com/html/martin-audio/wavefront-precision-series/wavefront-precision-series_user-manual_1733097035.webp)
Copyright © 2019 Martin Audio Ltd.
35
WPS USER GUIDE V1.0
WPS USER GUIDE
Insert front rigging pins in the fifth cabinet.
Raise the array clear of the transport cart, allowing access to the
rear of the array.
The cabinet angles will open as far as the pins will allow to
the angle that has been pre-selected. Insert rigging pins at the
LOCK position on the remaining cabinets.
Swing the bottom four cabinets (which will now be a rigid array
due to the rigging pins) backwards until butted against the
upper half of the array.
Insert a pin in the rear rigging bracket at the correct angle. Allow the bottom four cabinets to swing back down and insert rigging pins into
the LINK and LOCK positions on the fourth cabinet. Connect the cable loom and any link cables as required to the lower four cabinets.
5
4