Martin Audio MA NETCONTROL, User Manual

Page: 20 / 31

19
6.3.2 Selecting Operate and Edit modes
You may select Operate and Edit modes using the dedicated buttons on the toolbar. Alternatively, you may
select the desired mode in the Mode menu, or by using function keys F9 (Go to Edit mode) or F10 (Go to
Operate mode).
6.3.3 Functions allowed in different mode and state combinations
Editable operations Edit Mode Edit Mode Operate Mode
Offline online online
New Yes No No
Open file Yes No No ----------------
Save*** Yes Yes Yes
Save as*** Yes Yes Yes ---------------
Exit Yes Yes Yes
Add device Yes Yes No ----------------
Reassign association,
drag
n’ drop No* Yes No
Rename device Yes Yes Yes ---------------
Delete device Yes Yes No
Copy device Yes Yes No ----------------
Cut device Yes Yes No
Paste device Yes Yes No ----------------
Insert Yes Yes No
Replace with new device Yes Yes No ----------------
Insert new device Yes Yes No
Disconnect physical device No* Yes No ----------------
Add to configuration No* Yes No
Rename group Yes Yes Yes ---------------
Delete group Yes Yes No
Add group Yes Yes No ----------------
Clear group Yes Yes No
Assign to group (marking) Yes Yes No ----------------
DIP switches Yes Yes Yes
Rename channel Yes Yes Yes ---------------
Delete subset Yes Yes No
Reconnect subset No Yes Yes ---------------
Power Yes** Yes Yes
Mute Yes** Yes Yes ---------------
Solo Yes** Yes Yes
*Not available
**Editable on devices in the configuration
***Not in Group view
6.4 Device view
6.4.1 Overview
Device View displays a list of all amplifiers (devices) included in the currently loaded configuration file. In the
Offline state, only the Configuration is shown. In the Online state, all devices uploaded from the physical
network are paired with corresponding devices in the Configuration.
Note: If the Configuration file is originally created by uploading data from the network, and if no changes
are made to either the configuration data or the physical amplifiers (e.g. changing DIP switches or position in
the subnet), then the corresponding fields for Configuration and Physical devices will be identical and
matched.