Whenever movement is detected within the range of the sensor the light will be switched ‘ON’
automatically
Tenical data of the PIR sensor is as below:
Detection angle: approx. 90°
Detection distance: Max. 7m
Duration time: 60s fixed;
Lux control level: 10±10Lux
Motion Sensor Settings
Good sensitivity walking
across the detection area.
Poor sensitivity
walking towards or
away from the sensor.
WALK THROUGH TEST
• Turn the switch to
‘
AUTO
’
and wait approximately a minute for the control circuit to stabilise.
Do not stand within the sensing range of the sensor!
• Direct the sensor towards detection area by mounting the light to desire spot.
• Walk slowly across the detection area. The sensor will detect the infrared radiation of the human body and turn
the light ON.
• Test the coverage of the area by walking further away from the sensor until you get satisfactory result.
• Once you are happy with the direction, you could mount the light there following the installation step above.
www.martecaustralia.com.au | 02 8778 7500 | [email protected]
Page 9
