Troubleshooting
NOTE: All Passive Infra-Red detectors are more sensitive in cold and dry weather than warm and humid weather.
Made in China
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTION
Light does not switch ON
when movement is present
in detection area.
1. Sensor positioned in wrong direction.
Readjust/redirect the fitting.
2. Nearby lighting is too bright.
Redirect sensor or relocate the fitting.
Light turns ON by itself for
no apparent reason (false
1. Heat sources such as aircon’s vents, heater
moving cars are activating sensor.
Adjust location of the light away from
these sources.
2. Animals/birds e.g. possums or domestic
animals.
Redirect the light may help. Relocate the
3.
Redirect the fitting.
Light remains ON.
1. Continuously false triggering.
Redirec
with a soft cloth approximately every 3 months.
Do not use chemicals.
Cleaning and Maintenance
www.martecaustralia.com.au | 02 8778 7500 | [email protected]
Page 10
ting the fitting may help.
