Product Installation
NOTE:
This product must be installed by a licensed electrician.
NOTE:
For best performance install at a height between 2 and 2.5 metres.
1.
2.
Remove the mounting plate ‘A’ from light body ‘B’ by press the wall mount plate lock switch ‘C’.
3.
Drill two holes in the wall using the mounting holes ‘D’ on the mounting plate ‘A’ as a template.
Note: exercise caution to avoid drilling into existing electrical wiring.
Switch the light between "AUTO" and "OFF" according to marking on the switch ‘F’.
4.
5.
6.
.
7
www.martecaustralia.com.au | 02 8778 7500 | [email protected]
Page 8
E
E
D
B
C
F
A
