6
•
For using dry mill, turn it’s container (7) upside down and remove mill blade unit (8). Put ingredients into container and attach the blade unit (8). Install the assembled mill onto blender’s
motor unit (5).
•
Speed modes: 1, 2 or pulse mode . To stop the blender press 0.
•
Start with lower speed and then increase it. Use pulse mode for short times if necessary.
•
Do not put more than 0.8l of hot liquids or foamy ingredients. Never exceed max level of the jar!
•
If ingredients are not mixed well or stuck, stop the blender and mix the ingredients with silicone spatula. It is recommended to mix sticky ingredients from time to time with the spatula.
Caution: never put any items in the blender jar when blade is working!
•
Before opening lid wait until blade fully stops. Before removing jar from the motor unit unplug the device from the power source.
CAUTION: For most kinds of food, it is advisable to switch on the device a few times in succession and then to continue operating until the required degree of fineness has been achieved.
Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute. In pulse mode work time should not exceed 20 secs.
CLEANING AND MAINTENANCE
•
Unplug the appliance from the power supply.
•
Wipe the motor outside with a damp cloth.
•
Wash jar, blades and lid right after use with warm soapy water and wipe it with dry cloth.
•
Do not use aggressive and abrasive agents for cleaning
CAUTION: The blades are sharp and therefore dangerous. Handle with caution.
STORAGE
•
Before storing, dry thoroughly the container, container lid, cutting blade.
•
Store the appliance in a cool, dry place.
SPECIFICATION
Model
Power supply
Power
Net weight / Gross weight
Package size (L х W х H)
MT-1569
230 V ~ 50 Hz
800 W
2.5 kg / 2.65 kg
200 mm x 170 mm x 390 mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Current information about service centers is available on the website http://multimarta.com
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China
