8
Always iron these fabrics at low temperatures. The plate may cool down to the point where no more steam comes out, but rather drops of boiling water that can leave marks or stains. In these cases, the Anti-drip system automatically activates to prevent
vaporization, so that you can iron the most delicate fabrics without risk of spoiling or staining them.
CARE AND CLEANING
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
Clean the exterior with a damp cloth and wipe dry.
Scoria on the soleplate may be removed with a rough cloth soaked in vinegar.
Do not use abrasive cleaners.
SELF-CLEANING
It is important to apply the self-cleaning function at least every two weeks to remove impurities, etc.
The harder the water the more the iron should be self-cleaned.
For the model MT-1144:
-
Fill the water reservoir up to the “МАX” position.
-
Stand the iron on its rear side.
-
Set the maximum temperature by thermoregulator.
-
Insert the main plug into the wall socket.
-
Allow the iron to heat up until the light indicator is off.
-
Hold the iron horizontally over the sink then turn Steam control switch for Self-clean.
-
Boiling water and steam will now be ejected from the holes in the soleplate. Impurities are washed with it. Move the iron forwards and backwards while this happened.
-
Set the steam control switch to the „„0‟‟ position when the water reservoir has become empty.
-
Repeat self-cleaning if you notice that much impurity or others has been washed out.
-
Move the iron over a (preferably) old piece of cloth. This to ensure that the soleplate will be dry during storage.
-
Unplug and allow the iron to cool down before storing it.
-
Make sure that the soleplate is completely dry before storing it.
For the models MT-1125, MT-1126:
-
Fill the water reservoir up to the “МАX” position.
-
Stand the iron on its rear side.
-
Set the maximum temperature by thermoregulator.
-
Insert the main plug into the wall socket.
-
Allow the iron to heat up until the light indicator is off.
-
Hold the iron horizontally over the sink then push and hold Self-clean button.
-
Boiling water and steam will now be ejected from the holes in the soleplate. Impurities are washed with it. Move the iron forwards and backwards while this happened.
-
Set the steam control switch to the „„0‟‟ position when the water reservoir has become empty.
-
Repeat self-cleaning if you notice that much impurity or others has been washed out.
-
Move the iron over a (preferably) old piece of cloth. This to ensure that the soleplate will be dry during storage.
-
Unplug and allow the iron to cool down before storing it.
-
Make sure that the soleplate is completely dry before storing it.
STORAGE
Unplug the steam iron from the power supply and allow cooling down completely.
Empty the water tank after each use, and then wrap the cord around the heel rest.
To protect the soleplate, place the steam iron in an upright position on its heel rest.
