Mars CPU04, User Manual

Page: 7 / 20

7
Titan CPU Channel Mul plexer - Opera on
LED Status Indicators
R – A red LED indica ng the recording status.
S – A green LED indica ng that the Titan CPU is scanning.
E – A red LED indica ng an error condi on within the Titan CPU.
P – A green LED indica ng that the Titan CPU is ON.
ETHERNET
An RJ-45 port that enables the Titan CPU to operate over an Ethernet
network, or to connect to a PC using an Ethernet crossover cable.
Panel Components
REM
An 1/8” TRS connec on that permits remote Start/Stop recording.
POWER The 4-pin power connector provides the power input of the
Titan CPU Channel Mul plexer.
NOTE: The 24V, 6-amp Power Adapter furnished
with the Titan CPU is su
ffi cient to power the CPU and
approximately eight Input Modules with no excitation.
If using the CPU12 with more than eight modules
connected, or if excitation is to be applied
, you will
need to provide additional power either by powering
some Input Modules separately with additional
Titan power adapters or by providing power from
another source. In the latter case, observe the power
connection shown.
For all test con fi gurations, Mars Labs recommends
powering input modules separately to avoid potential
power issues.
PGM
A mini-USB port for communica ng with the device internal processor.
LED Port Indicators (CPU08/CPU12)
Green (P) - When lit, indicates that a four-port group is powered and ac ve.
Red (U) - When lit, indicates that a four-port group is providing power to the
RJ45 ports.