GENERAL MESSAGES
Most messages and alerts will appear at the bottom of the normally used screens.
Several alerts and messages may be displayed in a sequence.
– – – –°F – – – –°C
Water Temperature is Unknown
After the pump has been running for 1 minute, the temperature will be displayed.
Possible freezing condition
•
A potential freeze condition has been detected, or the Aux
Freeze Switch has closed. All water devices are activated.
•
In some cases, pumps may turn on and off and the heater
may operate during Freeze Protection.
•
This is an operational message, not an error indication.
The water is too hot – M029*
The system has detected a spa water temp of 110°F (43.3°C)
or more, and spa functions are disabled. System will auto reset
when the spa water temp is below 108°F (42.2°C). Check for extended pump operation or
high ambient temp.
*M0XX is a Message Code. Codes like this will be seen in the Fault Log
15
