background image

THE MAIN SCREEN – Continued

Navigation

Navigating the entire menu structure is done by touching the screen.

The three screen selections indicated below can be selected. Pumps, settings and music*: 
Touch one of these to enter a different screen with additional controls.

Most menu screens time out and revert to the main screen after 30 seconds of no activity.
*Music button active only when equipped with Bluetooth Audio system option.

Messages

At the bottom of the screen, at certain times an indicator may appear showing that a message 
is waiting. Touch this indicator to go to the Message Display Screen. On that Screen some of 
the messages can be dismissed. 

A Warning Message is waiting

Set Temperature

Press Up or Down once to display the Set Temperature (indicated by a flashing ºF or ºC, plus a 
change in color of the temperature).

Press Up or Down again to modify the Set Temperature. The Set Temperature changes 
immediately.

Press-and-Hold

If Up or Down is pressed and held, the temperature will continue to change until you stop 
pressing, or until the Temperature Range limits are reached.

Pumps

Settings

Light

Music

Temperature up

Temperature Down

3

Summary of Contents for spaTouch2




















Reviews: