Marquette Hellige GmbH
MicroSmart V 2.xx
Page 51
Servicing Instructions 227 470 35 B - 97.12
8 Maintenance and care
8.1 Technical inspection
Technical inspections
must be carried out once every year.
Note!
The following checks and tests must be carried out by personnel who are qualified to maintain
this equipment.
Note:
Check the operational safety and the functional safety of the unit using the following check lists.
They serve the experienced technician to check the appliance.
The person carrying out checks and inspections must be familiar with the operation of the unit as
specified in the operating instructions.
The test items are based on the following measuring and test equipment:
The tests should be carried out with customer´s accessories. This will ensure that any defective
accessories are automatically identified.
If measuring and test equipment other than the above is used, the test items and the tolerance
values may have to be modified accordingly.
8.1.1 Visual checks
Check unit and accessories to make sure that:
- safety insets comply with the values specified by the manufacturer
- safety notices attached to the unit are readable
- the mechanical condition allows the continued use of the unit
- no pollution reducing the safety standards are found
