Marmitek SWM1P, User Manual

Page: 18 / 48

© MARMITEK 18
Manual operation
Up/down
With the Up and Down key of the momentary switch the sunblind can be
moved to the correct position using short and long pulses.
Up function
Press briefly: The sunblind (roll-down shutter) moves in (up),
to the end.
Press long: The sunblind (roll-down shutter) moves in (up) until
the key is released. The movement stops immediately.
Down function
Press briefly: The sunblind (roll-down shutter) moves out (down),
to the end.
Press long: The sunblind (roll-down shutter) moves out (down)
until the key is released. The movement stops immediately.
As soon as the key is released the sunblind module sends a Marmitek X-10
EXTENDED command via the mains with its new position, possibly with an ON
or OFF command if the sunblind reached respectively the 0% position or the
100% position.
Preset function
With the Preset a desired preset position of the sunblind or
roll-down shutter can be saved and afterwards be recalled with
one simple push on the button.
Programming the Preset position
As soon as the sunblind or roll-down shutter has reached the desired position
(operate with UP and DN key) this can be saved by holding the Preset key
down for more than 5 seconds. The current position will be saved as Preset
position. The module has 25 possible Preset values. If the desired position
differs from these possible values, the module will round off this position to
the nearest possible value. This value can differ at most 4 % from the desired
position.
Operating the Preset function
By pressing the Preset key the sunblind moves to the set Preset position. The
sunblind module sends an EXTENDED command via the mains with its new
position. The sunblind module also sends an ON command at its Preset