Combimatic_v2_EN_210315 29
Combimatic
Operation
Grinding wheel diameter:
Scale:
150 mm (5 .9
″
)
(new grinding wheels)
1–3
140 mm (5 .5
″
)
3–5
130 mm (5 .1
″
)
4–6
5 . Repeat steps 1–2 until the grinding depth is
equal .
5 .2 .10 Set the grinding length
1 . To set the approximate grinding length, turn the
chain pusher adjustment knob:
• clockwise, to grind more, resulting in a shorter
cutter top plate, or
• counter-clockwise, to grind less, resulting in a
longer cutter top plate .
5 .2 .11 Test the grinding settings
1 . Set the chain pusher switch to ON . The chain
pusher arm will push the chain forward .
2 . Monitor the grinding wheel movements, and
check if the chain is sharpened .
3 . If required: Turn the grinding depth knob,
located on the back of the grinding head, to
make minor adjustments for the grinding depth .
4 . If required: Turn the chain pusher adjustment to
make minor adjustments for the grinding length .
5 . Set the chain pusher switch to OFF when the
grinding head is in its uppermost position and
the chain lock is not engaged .
Important! If the chain has double tie straps, start
grinding on the first cutter behind the double-link .
