Button
One Chirp
One LED Pulse
(Factory Default
Setting)
Two Chirps
LED Two Pulses
Three Chirps
LED Three Pulses
Four Chirps
LED Four Pulses
Gasoline Engine
Diesel Engine with
Wait-To-Start Light
(White/Green wire must
be connected)
Diesel Engine without
Wait-To-Start Light
10 Second
Warm Up Timer
Diesel Engine without
Wait-To-Start Light
15 Second
Warm Up Timer
Diesel Engine without
Wait-To-Start Light
20 Second
Warm Up Timer
10 min. Run Time
20 min. Run Time
30 min. Run Time
5 min. Run Time
Factory Alarm Disarm
with Channel 3 On
Without this Feature
Constant Parking
Light Output
Parking Light
Flashing Output
Door Lock Before Start
Door Lock
After Shutdown
Door Lock Before Start
and Door Lock
After Shut Down
Without This Feature
Press Button
to Activate Remote Start
Press Button
to Activate Remote Start
Press Button
to Activate Remote Start
Fahrenheit Display
for Temperature
Celsius Display
for Temperature
Temperature Control
Starting OFF
Temperature Control
Starting 5° F (-15° C)
Temperature Control
Starting 4° F (-20° C)
Temperature Control
Starting 22° F (-30° C)
Step 3
Remote Start Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the next feature.
ON
Turn On the Ignition
3 long chirps & 3 flashes of the parking lights will confirm exit
of the programming mode.
Note:
Waiting 15 seconds after the last command will also
cause the system to automatically exit the programming mode.
Step 4
+
+
+
+
+
21
-
M11A-IM 3/8/05 3:43 PM Page 21
