Markem Imaje 9028, User Manual, Page: 92 / 177

Editing a message
A46980-AB.doc
91/176
■ Distribution codes
The
cursor signals the bottom of the barcode assembly (bars + human readable text)
whatever the position of the human readable text.
You can print the bars and the cleartext on a single jet. Pay attention to the height of the
bars and the cleartext.
The size of the digital translation is variable, it is the size of the current font.
Parameters can be set for the height of the bars. The translation can be located above or
below. Modifying these three parameters gives you a great number of options for
positioning your barcodes in the message.
EAN 13, EAN 8, UPCA, UPCE
□ Allows for transcribing digital characters in barcode only.
□ These characters may be variable (counter, date, etc.).
□ 13 characters for EAN 13.
□ 8 characters for EAN 8.
□ 13 characters for UPCA, the first figure is always equal to 0.
□ 8 characters for UPCE, the first figure is always equal to 0.
The dialog box is the same as that for the 2/5 interleaved.
ATTENTION
The last character entered is always considered as being the
check digit. If the figure is not correct, the printer will signal this
and automatically replace it with the correct value.
42222222222