Markem Imaje 9028 User Manual Download Page 21

Page: 21 / 177

Presentation of the operator interface

A46980-AB.doc

20/176

Pressing and holding this key when editing in lower case

allows for switching to writing in upper case and back.

Pressing these keys simultaneously allows for moving a page

at a time towards the end of the message library list.



Pressing these

keys simultaneously allows for moving a page

at a time towards the start of the message library list.

Warning lights

This green warning light is lit when the printer is switched on.

This warning light lets you know the jet status:

□ flashing green warning light

: jet switched on not ready or

faulty

□ steady green warning light

: jet ready for printing

□ orange warning light

: jet printing

□ blank warning light

: jet stopped

This red warning light:

□ flashes to signal an alarm,

□ is steadily lit to signal a fault.

Summary of Contents for 9028


















































































































































































Search results

Summary of Contents for 9028

Reviews:

Markem Imaje 9028, User Manual, Page: 21 / 177

Search results

Summary of Contents for 9028

Reviews: