Markem Imaje 9028, User Manual, Page: 64 / 177

Editing a message
A46980-AB.doc
63/176
■ Set off
This function allows for choosing between the object mode, repetitive mode and multitop
mode:
□ Object
This mode corresponds to the printing of a single message per object.
Object mode options

Printer preparation/Initialization/Message/miscellaneous/ Top object mode
Continue
or
Stop
:
If the Top object mode is Stop , printing stops when the Top information is absent (even
if the message is not completely printed).
With the Top object mode Continue , printing of the message is completed, even if the
Top information disappears.

Printer preparation/Initialization/Printer/miscellaneous/ Dtop filtering (uS)
Value from 200 μs to 9999 μs. This filtering corresponds to the minimum time that the
"TOP" object detection signal has to maintain to be taken into account by the printer.

Printer preparation/Initialization/Message/Miscellaneous/ Dtop active edge
Rising or Falling : Choose whether the Dtop signal is active on the rising or falling
edge.
□ Repetitive
This mode corresponds to continuous printing while the object detector is activated.
□ Multitop
This mode corresponds to continuous printing of a number of specified messages for a
top object. The parameters for this number are set in the function

Printer preparation/Initialization/Printer/miscellaneous /Multitop nbr
■ Unit
This function allows for choosing the unit,
millimeter
or
bit,
for programming the functions
Forward margin
,
Return margin
and
Repetitive interval
.
■ Forward margin
This parameter represents the space between the object detection point and the start of
printing (in the normal "message direction"). Value: from 3 to 4095.
■ Return margin
This parameter represents the space between the object detection point and the start of
printing (in the inverse "message direction"). Value: from 3 to 4095.