Mark optitherm 06 29 191, Technical Manual

Page: 11 / 152

EN
11
As standard, the overtime timer will switch the OptiTherm to the day temperature The maxi-
mum time duration is 3:00 hrs. The settings can be changed in the settings menu:
§5.7
overtime
timer
5.0 Change settings
5.1 Call user menu
To activate the users menu:
• You push the
OK button.
• After which you enter the correct Pin code according to the image below
(standard factory setting is 1000).
• with the
 and  button you change the flashing figure.
•
you confirm this with the OK button and you jump to the next figure. After you push on the
OK button at the 4th figure and you enter the correct pin code, you enter the user menu and
you can change the temperature setting, the switch times, the exception days and all the other
settings.
When an incorrect pin code is entered the screen image pin code input remains visible and the
code jumps back to 0000.
Note!
When no button is pressed for the duration of 1 minute the OptiTherm display will automatically
leave the menu and go back to the main display.
select modify
User Menu
Clock Program
Special day
Settings
Temperature
OK
ESC ESC
2x
OK
factory default
menu code
1 0 0 0
User Menu
18.0 °C
01-03-2011
08:10
0 . 2 1
Code 0 0 0 0
OK
na 4x
to next digit