Mark EASYAIR 100, Technical Manual

Page: 7 / 58

7
EN
3.2.1. HORIZONTAL ASSEMBLY WITH USING INSTALATION HANDLES.
I t is possible to assemble EASYAIR do the wall horizontally in two options:
OPTION I: Assembling handles with their arms faced downwards. In this option you should first screw the installation
handles to the wall (1) with intervals W1 for a 1m curtain (there are 2 installation hanles) and W1, W2 for 1.5m and 2m
curtain (there are 3 installation handles) so that the handles' arms are levelled.
Then lift the curtain and assembly with using screws (2) M8x20 and plain washers (3). Tighten the screws (2) and close the
handle's covers (4).
ATTENTION!
The minimum distance between the unit and the ceiling should be 0.1m.
OPTION II: Assembling handles with their arms faced upwards.
Assembly consists in screwing brackets to the curtain (1). To mount the brackets to the curtain, with the housing upside down, punch holes (5) from the outside in the shields (4) using a
hammer and a screw. Click the shields on the brackers (1). Mount the brackets on the curtain using M8x20mm screws (2) and washers (3). This assembly option allows for mounting brackets
to the curtain first, and then screwing the entire housing to the wall.
ATTENTION ! The minimum distance between the unit and the ceiling should be 0.1m .
W1 [mm] W2 [mm]
EASYAIR W, E, C100 772 -
EASYAIR W, E, C150 507 772
EASYAIR W, E, C200 921 910