43
5
REPEAT THE PROCESS OF “TEACHING” NEW SPECIAL COMMANDS
UNTIL ALL DESIRED COMMANDS HAVE BEEN LEARNED BY YOUR
REMOTE CONTROL.
If you take longer than approximately ten seconds between button pushes,
the Nº37 will time out and return to normal operation. If this occurs, return
to step #1 in this section. You may either cycle through the entire list by
pressing
p
repeatedly, or move backwards through the list by
pressing
program –
.
6
WHEN FINISHED, RETURN TO NORMAL OPERATION BY ALLOWING THE
Nº37 TO “TIME OUT”
The Nº37 will “timeout” and return to normal operation after approximately
ten seconds.
