39
Changing Link Options
The following procedure will guide you through changing your Link options,
should you decide you would like something other than the factory’s default set-
tings. (Note that most people are perfectly satisfied with the default settings, and
never need to concern themselves with this section.)
1. Make sure that the
main power
switch is set to the “on” (“
|
”) posi-
tion and the unit is not in “standby.”
Note: To change your Nº37’s
link settings, your Mark Levinson digital processor also must be con-
nected (Linked) and turned on.
2. Press
and hold
the front-panel
mode
button until
SET
followed by
LINKS
appears on the display. Release the
mode
button; subsequent
“clicks” of the
mode
button will cycle through each of your Nº37’s
options, in this order:
STDBY +
NAME +
(
+
indicates that the option is turned
on
)
PLAY +
(
–
indicates that the option is turned
off
)
DISP +
Continued clicks on the
mode
button will return you to the begin-
ning of the list, in case you accidentally pass the option you want
to change.
(Note that the Polarity Link is always on and cannot be disabled,
other than by disconnecting the Link cable.)
3. When the display shows the link setting you want to change, you
may turn the link
on
by pressing the
p
button; to turn
the link
off
, press the
program –
button.
4. Repeat step 4 for each link setting you want to change.
5. When you have finished, press
and hold
the
mode
button again to
confirm your change(s). The display will read
SAVED
.
Your link settings remain in memory when you place the Nº37 into
standby
,
when you turn off the
main power
switch — even if AC power is interrupted.
Auto-Standby
The Nº37 also may be set to automatically enter standby when left in stop for a
user-selectable period of time. As shipped from the factory, its standby function is
manual (that is, it only enters or leaves standby when told to do so by the user).
To change between manual and timed/automatic standby:
1. Press
and hold
the
standby
button until the display reads
MANUAL
.
2. Release the
standby
button and then “click” it to cycle through the
various options:
5 MIN
,
15 MIN
,
30 MIN
,
60 MIN
, and
MANUAL
. Select
the mode you want.
3. Press
and hold
the
standby
button again until the display reads
SAVED
.
