30
Basic Operation
Before operating your Nº37, take a minute to become familiar with its controls
and their locations. (See
“Front Panel”
and
“Remote Control.”
)
Loading a CD
To load a CD:
1. Make sure that the
main power
switch is set to the “
|
” position.
2. Enable the Nº37’s controls by pressing
standby
if in standby.
3. Press
stop/drawer
to open the drawer.
4. Place a CD into the recess of the drawer, label side up. Handle the
CD by the outer edges and center hole only.
6. Press
stop/drawer
.
Note: If you have previously saved a program for the CD, the letter
P
will appear
preceding the track number on the display. (See “
Programming the Nº37
.”)
To override a previously saved program, briefly press
program –
once. All of the
CD’s tracks will be accessible for basic operation, but the program will still be re-
tained in the Nº37’s memory.
Playing a CD
To play all tracks on the CD, press the
play
button. All tracks will play in order.
Play will stop automatically at the end of the CD.
To begin play with a track other than the first track:
1. Before pressing
play
, press
next
until the number of the desired
track shows on the Display. If you pass the track you want to play,
you can “back up” by pressing
previous
. (You may also select the
track using the numbered buttons on the Remote Control.)
2. Press
play
to begin playing that track. The remaining tracks will
play in order. Play will stop automatically at the end of the CD.
To return to the beginning of a track while it is playing, press
play
. Play will be
suspended briefly, then that track will replay followed by the remaining tracks on
the CD.
Random Play
Using the Remote Control, you may have the Nº37 play tracks totally at random.
To do this, press the
0
(zero) numbered key, then press
play
. The display will
show
RANDOM
briefly to indicate that you have entered the random-play mode.
Subsequently, the letter
R
will appear preceding the track number in the display
as a reminder. To cancel random play, press
stop
.
Navigating the Disc
You may skip to another track any time while a CD is playing. To move to an-
other track, press
next
(to go forward) or
previous
(to go backward) until the
number of the track you want to play shows on the Display. (You may also select
the track using the numbered buttons on the Remote Control.) Play will resume
as soon as the pickup reaches that track.
