31
Rev 20201007
Menu Colors:
There are two different backgrounds to choose from;
Dark Mode and Light. This will only change the color of the Menu
system and not the Sonar/GPS.
UTC Offset Hours:
This drop-down menu is for adjusting your time
on your MX-7GPS, it will come preset to the Central Time Zone.
Transducer Offset:
Measured in inches, use this feature to offset
the distance your transducer is below the water line to get a true
depth reading. If the transducer is a half-foot below the water line,
setting the Transducer Offset to “6” [1/2 foot] will compensate for the
distance below the waterline.
Battery Meter:
This gauge indicates the voltage currently being
produced by your battery. If the voltage drops below 11 volts, you
may see a decrease in performance. Recharging your battery after
each use will maximize the life of your battery and will ensure that
your MX-7GPS will run strong all day.
Settings: Save -
If you find a screen and mapping configuration that
you like, you can easily save them by highlighting this selection and
pressing the center ENTER key.
Settings: Restore -
If you have changed your settings and decide
you want to revert to your previously saved set-up, highlight this
section and press the center ENTER key.
Settings: Default -
This is where you can restore factory settings.
The factory settings are the most popular configuration, and if at any
time of changing your selections you want to revert to this screen,
you may easily do so here.
Night Mode:
This feature will put both the SONAR/GPS and the
MENU screens into NIGHT MODE.
Keypad Sound:
This feature will activate a “beep” sound anytime
you press a button on the control panel.