11
Rev 20201007
To mark your locations as a waypoint simply touch the WAYPOINT
button (flag button) located above the “X” EXIT button. If you would
like to mark a waypoint that is not your current location, simply
search the map with the four ARROW keys and press and hold the
WAYPOINT button where you would like the waypoint to be located.
All waypoint settings can be adjusted to your preferences by
entering the “Waypoints” settings menu.
MX-7GPS OPERATION
The MarCum MX-7GPS has many functions and settings that are
selected or changed by buttons on the Control Panel. Learning what
each of the buttons (POWER, SENS, IR, MENU, WAYPOINT,
ARROW KEYS, BACK ARROW / ENTER, +/-, X) does will enable
you to get the most out of your system.
Note: you can experiment with different settings and dashboard
arrangements in SIMULATOR mode.
CONTROL PANEL
The following is an explanation of each button on the control panel
and what it does. Some of the button functions can also be
accessed in the main menu. Pressing any of the Control Panel
buttons will cause a window to open, enabling the user to make the
desired adjustments. Any changes made to the settings will activate
when the EXIT (X) button is pressed.
POWER
- Press and hold this button for 2 seconds to turn the
system on or off. The power button is the very bottom left button on
the panel.
SENS
- The SENS (sensitivity) button controls the amount of
sensitivity required by the system to pick up objects like bottom,
weeds, fish, or lures and jigs. You can adjust this setting by using
the +/- buttons.
IR
- The Interference Rejection system is designed to suppress
competing return signals from other sonar units being used within
proximity. You can adjust this setting by using the +/- buttons.
