background image

12

© 2014                   S.p.A.

E N G

Check frequently and keep the inlet filter clean;
Check every month the pump chamber and keep clean from any foreign matter;
Check every month that electrical wiring is in good condition;

Every 1000 hours of pump operation substitute the motor brushes.

- Temperature of pump body and motor frame is within 60°C - 70°C;
- Regular flow and constant pump noise levels;
- Amp-draw within the limits indicated in the technical details.

- It is recommended that a specialized service technician be consulted for any pump repair
  work or the replacement of worn out internal components, exclusively with original spare
  parts;
- During the warranty period, only by authorized Marco S.p.A. personnel, failing which the
  warranty will expire.

L-4

NORMAL MAINTENANCE 

L-5

INDICATORS THAT  THE PUMP IS FUNCTIONING CORRECTLY  

L-6

TO OPEN THE PUMP  

M

ENVIRONMENTAL DISPOSAL  

WARRANTY  

N

Upon re-use, run the pump briefly (a few seconds) and then tighten the screws again. 
Check under conditions of maximum operating pressure that the motor current value is 
within the motor label specifications.

     1. The Warranty period is 2 years from date of purchase on production of the 

appropriate sales invoice.

2. Should the original sales invoice not be available, then the 2 year warranty period 

will be valid from date of production.

3. The Warranty becomes null and void in the case of incorrect utilization or disregard 

of the instructions contained herein.

4. The Warranty only covers original production defects.
5. The Warranty does not cover any related installation costs involved.
6. Transport costs are refundable only in the case where warranty has been duly 

recognized and accepted by Marco Spa. These costs will be limited to the actual 
shipment costs between Marco Spa warehouse and the client's delivery address.

7. No credit notes or replacement items will be issued prior to the receipt and proper 

testing of any Marco goods that are deemed faulty.

      Do not dispose of pumps into household waste. Pumps that are non longer usable must
      be collected separately and disposed of in an environmentally correct manner.

Summary of Contents for 164 662 12 - UP2/A 12V
















Reviews: