8
© 2014 S.p.A.
A
PRODUCT DESCRIPTION
Temperature:
min. -10 °C / max. +40 °C
Relative humidity:
max. 90 %
Warning:
the above indicated temperature ranges are applicable to all components of the
pump and these limits must be respected in order to avoid any possible damage or
malfunctioning.
The pump has been designed for discontinuous use. Under conditions of high operating
pressures (eg. with closed or blocked outlet, excessive length of the delivery circuit and/or
excessive pressure due to accessories), the pump can be subjected to elevated stresses
and overheating and therefore should not be used for prolonged periods under such
conditions.
ELECTRICAL CONNECTIONS
D
OPERATING CYCLE
E
AMBIENT CONDITIONS
C
TECHNICAL DETAILS
B
APPLICATIONS
F
There are numerous fields of applications for the pump, however only exclusively with
the allowed liquids mentioned:
- Main use as automatic pump for freshwater and sanitary water systems on boats, camper;
Self-priming gear pump, integrated check valve and pressure switch: to be used as automatic
pump for boats, trucks, camper, etc.
Nichel-plated brass body, PTFE gear, stainless-steel shaft and lip seal.
The pressure switch is preset at 1,5 bar.
The electric pump must be connected to a source of direct current (either battery or
DC power supply) with an amp rating of over 7,5A and 4A at nominal voltage of 12V and 24V
respectively.
fuse.
The pump must be protected by a suitable rated
E N G
CODE
TYPE
VOLT
FUSE
FLOW RATE
PRESSURE WEIGHT P.CS x CART.
164 662 12
12
7,5 A
164 662 13
24
4 A
UP2/A
10 l/min
1,5 bar
1,2 kg
12
