9
© 2014 S.p.A.
E N G
Allowed:
FRESH WATER AND SEA WATER
DIESEL FUEL with viscosity between 2 and 5.35 cSt (relative to 37,8°C temperature)
Minimum flashpoint (PM): 55°C.
Not allowed: Related dangers
PETROL (GASOLINE)
FLAMMABLE LIQUIDS with PM < 55°C
LIQUIDS WITH VISCOSITY > 20 cSt
FOODSTUFF LIQUIDS
CORROSIVE CHEMICAL PRODUCTS
SOLVENTS
Due to limited weight and dimensions the pump does not require the use of any special
handling or lifting equipment. When handling manually, normal personal protective gear
should be worn (safety shoes with toe piece, etc.)
The pump is carefully packed prior to shipment. Upon receiving, the pump packaging
should be inspected for damages and the pump stored in a dry area.
FLUIDS ALLOWED / NOT ALLOWED
G
TRANSPORTATION AND HANDLING
H
INSTALLATION
I
It is recommended that the use of the pump be according to normative safety standards
and also as per the precautions listed below.
I-1
PACKAGING ENVIRONMENTAL DISPOSAL
I-2
PRELIMINARY CHECKS
Check that there has been no damage to the pump during transportation or storage. Both
inlet and outlet ports should be carefully cleaned removing possible dust or residual
packaging material. Verify that the available electrical power supply corresponds to the
pump specification requirements.
FIRE EXPLOSION
MOTOR OVERHEATING
FOODSTUFF LIQUID CONTAMINATION
PUMP CORROSION -
INJURY TO PERSONNEL
FIRE EXPLOSION
DAMAGE TO SEALS
FIRE EXPLOSION
I-3
POSITIONING OF THE PUMP
The pump can be mounted in any position. Fix the pump utilizing suitable screws
corresponding to the antivibration mounts supplied with the pump.
The user is invited to effect a proper waste separation, in order to facilitate the recycling
of the materials of which the packing is composed; disposal like CER 15.01.01/02
