9000 R Series IP Recorder with RAID Installation Guide
28
Unit Setup
Turn the key and pull the caddy door open. You can now slide the caddy out of the unit.
2
Loosen the four screws at the sides of the caddy hard drive bracket (two each side) and
remove the hard drive from the caddy.
Note:
Set the screws aside - you will use them to re-attach the hard drive.
3
Insert the new hard drive into the caddy bracket using the provided screws (four for each hard
drive).
The side of the hard drive with the exposed electronics must be facing down (the label facing up).
Install and tighten the two screws on one side of a hard drive before installing and tightening the
two screws on the other side. When tightening the screws, use 4.3 in-lbs (inch pounds) of torque.
4
Slide the caddy back into the recorder unit, close the door, and turn the key to secure the hard drive.
9248 unit with open
hard drive caddy
Side view of caddy
screw
screw
