9000 R Series IP Recorder with RAID Installation Guide
24
Feature Overview
NiCd Battery Pack and Lithium Battery
There is a NiCd battery pack and a lithium battery inside the unit.
NiCd Battery Pack
Used by the unit to allow graceful shut down during power outages.
The unit will perform a graceful shut down if power is removed for
more than 15 seconds.
Custom NiCd battery pack supplied by March Networks.
Lithium Battery
Provides backup power for the unit’s RTC (Real Time Clock).
WARNING:
Before you replace the batteries, read the “Battery Notices” on page 6. Only use approved
batteries in the unit. Before you replace the batteries, power down the unit. Ensure the LEDs at the front
of the unit are all off before you remove the cover.
ATTENTION :
Avant de remplacer les piles, lisez les « Avis pour les batteries » à la page 6. Utilisez
uniquement des piles approuvées dans l'appareil. Avant de remplacer les piles, éteignez l'unité. Assurez-
vous que les voyants LED à l'avant de l'unité s'éteignent avant de retirer le couvercle.
Lithium Battery
Rear of recorder
Rear of
NiCd battery unit
in the 2U model
recorder
recorder
View of main PCB without RAID card or connections
View of main PCB with RAID card and connections
