9000 R Series IP Recorder with RAID Installation Guide
14
Feature Overview
Weight
9116 R, 9124 R, and 9132 R (1U)
— 22.31 pounds / 10.12 kilograms (without hard drives)
9248 R and 9264 R (2U)
— 28.11 pounds / 12.75 kilograms (without hard drives)
Each hard drive (HDD)
— 1.7 pounds / 0.8 kilograms
Operating and Storage Temperature
Operating temperature: 32 to 104° Fahrenheit / 0 to 40° Celsius
Storage temperature: -40 to 158° Fahrenheit / -40 to 70° Celsius
WARNING:
The recorder must be mounted in accordance with the mounting guidelines in this publication to
ensure the unit remains within the recommended operating temperature range. For more information, see
“Mounting the Recorder” on page 26).
ATTENTION :
L'enregistreur doit être monté conformément aux directives de montage de cette publication
pour garantir que l'unité reste dans la plage de températures de fonctionnement recommandée. Pour plus
d'informations, voir « Mounting the Recorder » à la page 26).
High Temperature Shutdown
This feature ensures that the recorder shuts down if it gets too hot, and restarts when the
temperature drops to a safe level. If this occurs, a critical software alert is triggered.
Heat Dissipation
Under normal operating conditions:
9116 R, 9124 R, and 9132 R model
•
238 BTU per hour (recorder with 4 HDD drives)
9248 R and 9264 R model
•
238 BTU per hour (recorder with 4 HDD drives)
•
340 BTU per hour (recorder with 8 HDD drives)
Each hard drive (HDD)
•
27 BTU per hour
Power Ratings
Power input: 115-230 volts AC input (auto-sensing)
Current rating: 2.3 A
Frequency range: 50-60 Hz
Power consumption:
•
9116 R, 9124 R, and 9132 R model — 70 W typical, 135 W maximum
•
9248 R and 9264 R models — 100 W typical, 225 W maximum
Video Capture Rates
The IP camera input capture rate is dependent on the resolution and quality of the images
captured.The 9000 R series recorders accommodate a total recording rate of up to:
•
400 Mbps for the 9264 R model
•
300 Mbps for the 9248 R model
•
200 Mbps for the 9132 R, 9124 R, and 9116 R models
There is no set limit per camera channel.
