9000 R Series IP Recorder with RAID Installation Guide
15
Feature Overview
Front Panel LEDs
The colored LEDs (Light Emitting Diodes) on the front panel of the unit indicate status. Each
tricolor LED is marked to indicate which component the LED displays information about. The color
of the LED and whether the light is on solid, flashing, or off, gives you information about the
recorder.
Unit LED
The status of
the unit.
Green
Solid:
The unit’s software and hardware are operating correctly.
Flashing:
The power On/Off pinhole has been pressed, the power switch
has been turned off (2U model only), or the AC power has been removed —
the system is waiting for software to complete the shutdown of the unit.
Blue
Solid:
The operating system is loaded but the unit’s software application is still
loading.
Flashing:
The unit is booting up after the power switch has been turned on or
power has been applied, or after a software reboot.
Red
Solid:
The hardware watchdog timer has expired and reset the system.
Flashing:
The unit’s temperature is too hot for startup. The flashing red unit
LED indicates that startup is delayed until the fans cool the unit to an
acceptable temperature.
Operation LED
The status of
the unit’s
operation.
Green
Solid:
The software in the unit is operating correctly, and the unit is powered
and running.
Flashing:
The operating system is available but the software is still loading.
Blue
A system-level problem (non-critical) has been reported.
Red
A critical error has occurred.
Use the Administrator Console or Command Client software application to
review the health alert and determine a possible resolution.
For more information, see the
Administrator Console User Manual
or
Command Enterprise and Client User Guide
, available from the March
Networks Partner Portal website.
2U model Front Panel LEDs
1U model Front Panel LEDs
