9000 R Series IP Recorder with RAID Installation Guide
26
Unit Setup
Mounting the Recorder
Rack-mount the unit in a standard 19-inch 4-post server rack. The mounting rack rails are included
with the recorder.
WARNING:
Do NOT attempt to mount the recorder in a 2-post server rack unless you are using the March
Networks server shelf (part number 34916). If you do not have the server shelf, you must mount the
recorder in a 4-post server rack.
ATTENTION :
N'essayez PAS de monter l'enregistreur dans un rack de serveur à 2 montants, sauf si vous
utilisez l'étagère de serveur March Networks (numéro de pièce 34916). Si vous ne disposez pas de
l'étagère du serveur, vous devez monter l'enregistreur dans un rack de serveur à 4 montants.
Important:
Ensure that you read the “Rack Mounting Safety Precautions” on page 8 before you
mount your recorder in a rack, and conform to all the safety precaution instructions.
Important :
Assurez-vous de lire les « Précautions de sécurité pour une installation dans un rack » à
la page 9 avant de monter votre enregistreur dans un rack, et conformez-vous à toutes les
consignes de sécurité.
To rack-mount the recorder in a 4-post rack
1
Position the recorder in the appropriate position.
2
Using the included rack rails, attach the recorder to the rack.
For details, consult the documentation accompanying the rack rails.
To rack-mount the recorder in a 2-post rack using the shelf
Instructions for mounting the recorder using the server shelf are available from the March Networks
Partner Portal website.
Note:
You can optionally desk mount the recorder. To ensure the unit meets the recommended
operating temperature, the unit must be desk-mounted in a location that ensures that it is
unobstructed on all sides.
