60
2.3.5 Menu Tutorial
Purpose: shows how to use the menus (Figures 47 to 50)
This tutorial shows how to change the Battery Test Options. The other menus function in the same manner.
1. At the main menu (Figure 36), type 3 and press
Enter
.
The Maintenance Menu 3 appears as below (Figure 47).
Menu
Number
[0- MAIN MENU]
[3-MAINTENANCE]
30 Battery Test Options (available Line mode)
31 Output Shutdown
32 Inverter On/Off (available in Standby/Battery
Mode)
33 Change Password (can only be changed in line
mode)
34 Line Qualify Time
35 Battery voltage Level % capacity remaining
37 Resets the Event/Timer Counters (available in
Line Mode)
38 Battery charging Temperature compensation
39 Ext. Fan On/Off By Temperature
Prompt
>_
Figure 47
Maintenance Menu Screen
To the left of each maintenance option is a Menu number. Typing
30
and pressing
Enter
calls up the Battery
Test Options screen (Figure 48).
2.
Numbers or words inside square brackets show the present status value of that menu item.
[0-MAIN MENU]
[3-MAINTENANCE]
[30-BATTERY TEST OPTIONS]
300) Set battery test period [001] (Unit = minutes)
301) Battery Test On/Off [OFF]
>
Current
Value
Units of Measurement
Current
Status
To calculate the Test Period: Test Period = Current Value X Units
Example: Test Period = 001 x 1 Minute = 1 Minute
Figure 48
Battery Test Options Screen