28
Section 2.2
Operation
This section describes how to start, shutdown and operate the UPS.
2.2.1 The LCD Panel
Purpose: Describes the LCD display menus (Figure 18) and use of user-friendly sub-menus (Figure19).
When the
Output
LED is:
• ON
, the line is qualified and
the input power flows to
output.
Operating Modes
YY/MM/DD format
24-Hour
• FLASHING
, the unit is in
Battery mode.
• OFF
, the output is OFF, Input
line is not qualified or the unit
detected a fault.
If all
LEDs
are
OFF and the
LCD is BLANK
, the unit is shut
off.
When the
Fault LED
Is:
• ON
, the unit detected
a
Fault
.
When the
Alarm LED
Is:
• ON
, the unit detected
an Alarm.
Pushing the
ENTER
button
displays the problem.
STANDBY 07/01 13:34
UPS STATUS
Pressing the
ESC
button moves up one
level in the menu tree.
UPS data
Pressing the
ENTER
button moves down one
level in the menu tree.
Pressing the
Up
or
Down
buttons moves
sideways through the
menu tree.
Figure 19
LCD Panel Key Functions
TIP:
When the ambient air temperature drops below -20°C (-4°F), the LCD may turn DARK until the temperature
rises above -20°C (-4°F). However, the unit will operate normally.
MAIN SCREEN
Sub Menus
TIP:
The complete menu tree is
shown in Section 2.2.7, Figure 20.
STATUS
CONFIGURATION
MAINTENANCE