Marantz SR7012 Owner'S Manual Download Page 319

Page: 319 / 370

Speaker impedance
This is an AC resistance value, indicated in Ω (ohms).
Greater power can be obtained when this value is smaller.

Dialogue normalization function
This function operates automatically during playback of Dolby Digital,

Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS or DTS-HD sources.

It automatically corrects the standard signal level for individual program

sources.

Dynamic range
The difference between the maximum undistorted sound level and the

minimum discernible level above the noise emitted by the device.

Downmix
This function converts the number of channels of surround audio to a

lower number of channels and plays back according to the system’s

configuration.

Video

ISF
ISF (Imaging Science Foundation) is an organization that certifies video

technicians who are then qualified to carry out calibration and adjustment

to match the installation conditions. It also sets quality standards for the

optimization of device video performance.

Progressive (sequential scanning)
This is a scanning system of the video signal that displays 1 frame of video

as one image. Compared to the interlace system, this system provides

images with less flickering and jagged edges.

319

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands