Marantz SR7012 Owner'S Manual Download Page 317

Page: 317 / 370

DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an improved version of the conventional

DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling

frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital

sound. High data bit rate performance provides high quality sound. This

format is fully compatible with conventional products, including

conventional DTS digital surround 5.1-channel data.

DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio format created by Digital

Theater System (DTS). This format provides the facility to support up to 8

audio channels with a sampling frequency of 96 kHz/24 bit resolution and

up to 6 audio channels with a sampling frequency of 192 kHz/24 bit

resolution. It is fully compatible with conventional products, including

conventional DTS digital surround 5.1-channel data.

DTS:X
DTS:X produces a hemisphere of audio, where flyovers as well as ambient

backgrounds become truly enveloping. DTS:X objects enable audio to

move smoothly from one speaker to any other creating life-like realism.

DTS Neural:X
Enables an immersive audio experience for older content. DTS Neural:X

can upmix your stereo, 5.1 or 7.1 content to take full advantage of all

speakers in your surround sound system.

Audio

Apple Lossless Audio Codec
This is a codec for lossless audio compression method developed by

Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data

compressed to approximately 60 – 70 % can be decompressed to exactly

the same original data.

FLAC (Free Lossless Audio Codec)
FLAC stands for Free lossless Audio Codec, and is a lossless free audio

file format. Lossless means that the audio is compressed without any loss

in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,

2009 Josh Coalson
Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

Neither the name of the Xiph.org Foundation nor the names of its

contributors may be used to endorse or promote products derived from

this software without specific prior written permission.

317

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands