Marantz SR7012 Owner'S Manual Download

Page: 239 / 370

Subwoofer

Set the presence of a subwoofer.

Yes

(Default):

Use a subwoofer.

No:

Select when a subwoofer is not

connected.

When “Speaker Config.” - “Subwoofer” in the menu is set to “None”, No is

automatically set. (

p. 229)

If the “Front” setting is “Small”, the setting is automatically “Yes”.

SW Mode

Select low range signals to be reproduced by subwoofer.

LFE

(Default):

When “2ch Playback” - “Front” is set to

“Large”, only LFE signals are output from

the subwoofer. Also, when “2ch

Playback” - “Front” is set to “Small”, the

front channel low range signals are

added to the LFE signals and output from

the subwoofer.

LFE+Main:

The front channel low range signal is

added to the LFE signal output from the

subwoofer.

This can be set when “2ch Playback” - “Subwoofer” is set to “Yes”.

239

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands