Marantz SR7012 Owner'S Manual Download

Page: 315 / 370

Dolby Digital
Dolby Digital is a multi-channel digital signal format developed by Dolby

Laboratories.
A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2

surround channels (“SL” and “SR”) and the “LFE” channel for low

frequency effects.
Because of this, there is no crosstalk between channels and a realistic

sound field with a “three-dimensional” feeling (sense of distance,

movement and positioning) is achieved. This delivers a thrilling surround

sound experience in the home.

Dolby Digital Plus
Dolby Digital Plus is an improved Dolby Digital signal format that is

compatible with up to 7.1-channels of discrete digital sound and also

improves sound quality thanks to extra data bit rate performance. It is

upwardly compatible with conventional Dolby Digital, so it offers greater

flexibility in response to the source signal and the conditions of the

playback device.

Dolby Surround
Dolby Surround is a next generation surround technology that intelligently

up mixes stereo; 5.1 and 7.1 content for playback through your surround

speaker system. Dolby Surround is compatible with traditional speaker

layouts, as well as Dolby Atmos enabled playback systems that employ in-

ceiling speakers or products with Dolby speaker technology.

Dolby Speaker Technology (Dolby Atmos Enabled speakers)
A convenient alternative to speakers built into the ceiling, Dolby Atmos

Enabled speakers employ the ceiling above you as a reflective surface for

reproducing audio in the height plane above the listener. These speakers

feature a unique upward firing driver and special signal processing. These

features can be built into a conventional speaker or standalone speaker

module. The features minimally impact the overall speaker footprint while

providing an immersive listening experience during Dolby Atmos and

Dolby Surround playback.

Dolby TrueHD
Dolby TrueHD is a high definition audio technology developed by Dolby

Laboratories, using lossless coding technology to faithfully reproduce the

sound of the studio master.
This format provides the facility to support up to 8 audio channels with a

sampling frequency of 96 kHz/24 bit resolution and up to 6 audio channels

with a sampling frequency of 192 kHz/24 bit resolution.

315

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands