Marantz SR5011, Owner'S Manual

Page: 236 / 320

o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 27
0
Insert connection cables all the way in.
－
0
Check that input connectors and output connectors are not reversely connected.
－
0
Check cables for damage.
－
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
34
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 34
0
Check that a proper input source is selected. 69
0
Adjust the volume. 70
0
Cancel the mute mode. 70
0
Check the digital audio input connector setting. 185
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
－
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and PRE OUT connector.
－
No sound comes out when
using the DVI-D
connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
－
No sound comes out of a
TV that is connected via
HDMI.
0
Audio signals input to 7.1CH IN connectors on this unit cannot be output to the TV.
－
Contents Connections Playback Settings Tips Appendix
236
Front panel Display Rear panel Remote Index