7
Setup
Connections
ZONE 2
SOURCE
ZONE 3
ZONE 3
SOURCE
STATUS
DIMMER
VIDEO
AUX 1
SETUP MIC
INTEGRATED NETWORK AV RECEIVER
S
S
E
E
R
I
AVR-X4000
IN-
Command
L - AUDIO - R
1 CBL/SAT
3 GAME 4 NETWORK
QUICK SELECT
2 Blu-ray
PHONES
BACK
ENTER
INFO
SETUP
ZONE 2
SOURCE SELECT
MASTER VOLUME
ON/OFF
AUX 1
HDMI 7
5V/1A
ON/OFF
OPTION
Items not listed in
are sold separately.
Important:
Connect all cables securely and properly (with stereo cables: left with left, right with right). Do
not
bundle or wrap them with the power cable.
Not all of these steps may apply to your specific audio/video setup, but you will need to do
Steps 1
and
5
at the very least.
1.
Connect PMD-500D to your TV monitor or display by doing one of the following:
•
Use an HDMI cable to connect the
HDMI Output
to the HDMI input of your TV monitor or display.
•
Use an RCA composite video cable to connect the Composite Video Output to the composite
video input of your TV monitor or display.
•
Use RCA component (Y/Pb/Pr) video cables to connect the Component Video Outputs to the
component video inputs of your TV monitor or display.
•
Audio only: Use a coaxial cable to connect the
coaxial output
to the coaxial input of your TV monitor.
Alternatively, use a digital optical TOSLINK cable (IEC60958 Type II S/PDIF compatible) to connect
the
optical audio output
to the optical input of your TV monitor.
2.
Optional:
Connect PMD-500D to your sound system by doing either/both of the following:
•
Use XLR cables or a stereo RCA cable to connect the
audio outputs
(balanced or unbalanced) to
the analog inputs of your external receiver, amp, powered speakers, etc.
•
Use a digital optical TOSLINK cable (IEC60958 Type II S/PDIF compatible) to connect the
optical
audio output
to the optical input of your external receiver.
3.
Optional:
Connect a USB hard drive or SD/SDHC card with playable content to the
USB port
or
SD
card slot
.
4.
Optional:
Use a 9-pin D-Sub cable to connect the
Remote Input
to a host device (usually a computer)
that will control it.
Note:
to download the serial protocol guide for PMD-500D.
5.
After completing all the connections, use the included power cable to connect the
AC In
to a power outlet.
TV or display
Power
Receiver, amp, powered monitors, etc.
Summary of Contents for PMD-500D
Page 97: ...97 ...
Page 100: ...marantzpro com Manual Version 1 2 ...
