background image

MARANTZ DESIGN AND SERVICE

Using superior design and selected high grade components, 

MARANTZ

 company has created the ultimate in stereo sound.

Only original 

MARANTZ

 parts can insure that your 

MARANTZ

 product will continue to perform to the specifi cations for which 

it is famous. 

Parts for your 

MARANTZ

 equipment are generally available to our National Marantz Subsidiary or Agent. 

ORDERING PARTS :

 

Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specifi ed. 
The following information must be supplied to eliminate delays in processing your order : 
1. Complete address 
2. Complete part numbers and quantities required 
3. Description of parts 
4. Model number for which part is required 
5. Way of shipment 
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.

SHOCK, FIRE HAZARD SERVICE TEST :

 

CAUTION :

 After servicing this appliance and prior to returning to customer, measure the resistance between either primary AC 

cord connector pins ( with unit NOT connected to AC mains and its Power switch ON ), and the face or Front Panel of product 

and controls and chassis bottom. 

Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied, 

and verifi ed before it is return to the user/customer. 

Ref. UL Standard No. 60065.

In case of diffi culties, do not hesitate to contact the Technical 

Department at above mentioned address. 

070719MZ

USA

MARANTZ AMERICA, INC

100 CORPORATE DRIVE
MAHWAH, NEW JERSEY 07430
USA

EUROPE / TRADING

MARANTZ EUROPE B.V.

P. O. BOX 8744, BUILDING SILVERPOINT
BEEMDSTRAAT 11, 5653 MA EINDHOVEN
THE NETHERLANDS
PHONE : +31 - 40 - 2507844
FAX

: +31 - 40 - 2507860

KOREA

D&M SALES AND MARKETING KOREA LTD.

CHUNG JIN B/D., #1001,
53-5, WONHYORO 3 GA, YONGSAN-GU,
SEOUL, 140-719, KOREA
PHONE : +82 - 2 - 323 - 2155
FAX

: +82 - 2 - 323 - 2154

CANADA

D&M CANADA INC.

5-505 APPLE CREEK BLVD.
MARKHAM, ONTARIO L3R 5B1
CANADA

JAPAN

D&M BUILDING, 2-1 NISSHIN-CHO,
KAWASAKI-KU, KAWASAKI-SHI,
KANAGAWA, 210-8569 JAPAN

D&M Holdings Inc.

CHINA

MARANTZ SHANGHAI TRADING LTD.

ROOM.506 SHANGHAI LIGHT INDUSTRY MANSION
1578 NANJING (WEST) ROAD SHANGHAI
CHINA
TEL

: 021 - 6248 - 1064

FAX

: 021 - 6248 - 3565

NOTE ON SAFETY :

Symbol 

 Fire or electrical shock hazard.  Only original parts should be used to replaced any part marked with symbol 

 . 

Any other component substitution (other than original type), may increase risk of fi re or electrical shock hazard.

安全上の注意:

がついている部品は、安全上重要な部品です。必ず指定されている部品番号のものを使用して下さい。

The exchange of the Rechargeable Lithium Polymer 

battery (Pos. No. : 251).

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

充電式リチウムイオン電池(リチウムポリマー電
池)

(Pos. No. : 251)

の交換について

注意

注意

電池を誤って交換すると爆発する危険があります。
同一又は同等の型のものにのみ交換してください。

Summary of Contents for ds9001




























Reviews: