Paths to be confirmed
Display
Settings
What to confirm
4
Digital (signal) Path
(ZONE3)
L1
A 0 4 Z 3 D I G
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Stereo
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : ON
・Digital(PCM) input ⇒ ZONE3 RCA output (ZONE3 L/R)
(* The input source can be switched to any source except Online Music.)
5
HDMI (signal) Path
L1
A 0 5 H D M I
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : HDMI Fixed
Sound mode： Stereo
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・HDMI input ⇒ RCA output (Front L/R)
・HDMI input ⇒ XLR output (Front L/R)
(* The input source can be switched to any source except CBL/SAT.)
6
Analog AD (signal) Path
(MAIN ZONE)
L1
A 0 6 A D
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Analog Fixed
Sound mode： Multi Ch Stereo
Amp assign : 11.1ch
Floor Layout : 5ch&SB&FW
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
Speaker Select：Floor
Speaker Config ALL Speaker=Small/SW=Yes(2ch)
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output SW (20Hz) (Front L/R, Center, Surround L/R, Surround Back L/R, Front Wide L/R, Subwoofer)
・Analog input ⇒ XLR output, SW (20Hz) (Front L/R, Center, Surround L/R, Surround Back L/R, Front Wide L/R, Subwoofer)
(* The input source can be switched to any source except CBL/SAT.)
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
7
Analog ZONE2 (signal) Path
L1
A 0 7 Z 2 A S S
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： STEREO
Z2 Source : Source
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE : ON
ZONE2 : ON
ZONE3 : OFF
・Analog input ⇒ ZONE 2RCA output (ZONE2 L/R)
(* The input source can be switched to any source except CBL/SAT.)
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
8
Analog ZONE3 (signal) Path
L1
A 0 8 Z 3 A S S
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： STEREO
Z3 Source : Source
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : ON
・Analog input ⇒ ZONE 3RCA output (ZONE3 L/R)
(* The input source can be switched to any source except CBL/SAT.)
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
fig.04a
fig.04b
fig.05a
fig.05b
fig.05c
fig.06a
fig.06b
fig.07
fig.08
25
