Paths to be confirmed
Display
Settings
What to confirm
9
Analog Amp Assign (signal) Path
(Amp Assign：BiAMP-Surround Back)
L1
A 1 1 B A - S B
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Stereo
Amp assign : 9.1ch(Bi-Amp）
Preout for Bi-Amp : SURROUND BACK
Floor Sp : 5ch
Height Sp : None
Dolby Sp : None
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output → Front L/R or Surround Back L/R (Front output）
・Analog input ⇒ XLR output → Front L/R or Surround Back L/R (Front output）
(* The input source can be switched to any source except CBL/SAT.)
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
10
Amp Assign (signal ) Path
(Amp Assign : BiAMP-Front Wide)
L1
A 1 2 B A - F W
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Stereo
Amp assign : 9.1ch(Bi-Amp）
Preout for Bi-Amp : FRONT WIDE/HEIGHT2
Floor Sp : 5ch
Height Sp : None
Dolby Sp : None
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output → Front L/R or Front Wide L/R(Front output）
・Analog input ⇒ XLR output → Front L/R or Front Wide/Height2 L/R(Front output）
(* The input source can be switched to any source except CBL/SAT.)
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
11
Amp Assign (signal ) Path
(Amp Assign : BiAMP-Height1)
L1
A 1 3 B A - H 1
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Stereo
Amp assign : 9.1ch(Bi-Amp）
Preout for Bi-Amp:HEIGHT1
Floor Sp : 5ch
Height Sp : None
Dolby Sp : None
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output → Front L/R or Height1 L/R (Front output）
・Analog input ⇒ XLR output → Front L/R or Height1 L/R (Front output）
(* The input source can be switched to any source except CBL/SAT.)
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
12
Front Height (signal) Path
L1
A 1 4 F H
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Multi Ch Stereo
Amp assign ： 11.1ch
Floor Layout : 5ch&SB&FW
Height Sp : 4ch
Dolby Sp : None
Height Layout : Top Front & Top Rear
Speaker Select=Floor & Height
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output
Height1 L/R (Top Front output）
Height2 L/R (Top Rear output）
・Analog input ⇒ XLR output
Height1 L/R (Top Front output）
(* The input source can be switched to any source except CBL/SAT.)
Check PREOUT output.
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
13
Front Wide (signal) Path
L1
A 1 5 F W
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Multi Ch Stereo
Floor Layout : 5ch&SB&FW
Height Sp : 4ch
Dolby Sp : None
Height Layout : Top Front & Top Rear
Speaker Select=Floor
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output → Front Wide L/R
・Analog input ⇒ XLR output → Front Wide L/R
(* The input source can be switched to any source except CBL/SAT.)
Check PREOUT output.
(* Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
14
7.1ch INPUT (signal) Path
L1
A 1 9 7 . 1 I N
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : 7.1Ch In
Amp Assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp : None
Dolby Sp : None
Speaker Config : Front, Center, Surround, Surround Back(2ch）,
Subwoofer
Speaker Config ALL Speaker=Small/SW=2ch
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
7.1ch In input, check the following.
・7.1ch In input ⇒ RCA output → Front L/R, Center, Surround L/R, S.Back L/R, Subwoofer
・7.1ch In input ⇒ XLR output → Front L/R, Center, Surround L/R, S.Back L/R, Subwoofer
fig.09
fig.10
fig.11
fig.12a
fig.12b
fig.13a
fig.13b
fig.14
26
