2-1. DIAGNOSTIC MODE (Service Path Check Mode)
2-1.1. Actions
This function is convenient for confirming problem paths in the product and checking the paths after repairing.
The Video and Audio paths can be checked.
The backup data is not rewritten.
2-1.2. Starting up
While holding down buttons "
ZONE SELECT
" and "
BACK
" simultaneously, press the power button to turn on the power.
Select "
1.SERVICE CHECK
", then press the "
ENTER
" button to activate the diagnostic mode.
The "
TUNED
", "
STEREO
" and "
RDS
" segments are lit in this mode.
2-1.3. Canceling diagnostic mode
Press the power button to turn off the power.
2-1.4. Selecting items to check
Press the
q
button to switch between video items and audio items.
Press the
w
or
e
button to select the previous or next item.
The unit
Remote control unit
Actions
q
w
e
q
w
e
Audio ⇔ Video
PREVIOUS
NEXT
Audio ⇔ Video
PREVIOUS
NEXT
Button
DIMMER
CURSOR
0
CURSOR
1
SLEEP
CURSOR
0
CURSOR
1
2-1.5. Audio system confirmation items
See the block diagram fig.XXth.
Paths to be confirmed
Display
Settings
What to confirm
1
Analog (signal) through Path
L1
A 0 1 A N L G
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Analog Fixed
Sound mode： Direct
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp : 2ch
Dolby Sp : None
Height Laytou : Front Height
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Analog input ⇒ RCA output (Front L/R)
・Analog input ⇒ XLR output (Front L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
2
Digital (signal) Path
(MAIN)
L1
A 0 2 D I G .
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Digital Fixed
Sound mode： Multi Ch Stereo
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
Speaker Select : Floor
Speaker Config : ALL Speaker = Small/SW = Yes(2ch)
MAIN ZONE : ON
ZONE2 : OFF
ZONE3 : OFF
・Digital input ⇒ RCA output (Front L/R, Center, Surround L/R, Surround Back L/R, Subwoofer)
・Digital input ⇒ XLR output (Front L/R, Center, Surround L/R, Surround Back L/R, Subwoofer)
(* The input source can be switched to any source except CBL/SAT.)
3
Digital (signal) Path
(ZONE2)
L1
A 0 3 Z 2 D I G
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： Stereo
Amp assign : 11.1ch
Floor Layout : 5ch&SB
Height Sp. : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE : ON
ZONE2 : ON
ZONE3 : OFF
・Digital (PCM) input ⇒ ZONE2 RCA output (ZONE2 L/R)
(* The input source can be switched to any source except CBL/SAT.)
fig.01
fig.02a
fig.02b
fig.03a
fig.03b
fig.03c
24
