GEX-P5750TVP
INST
ALLA
TION MANUAL
MANUAL D’INST
ALLA
TION
1. Remote sensor
2. Double-sided
tape
This product conforms to new cord colors.
Los colores de los cables de este producto se
conforman con un nuevo código de colores.
u« l “UN'« «c¼ r−M¹
Æ…b¹b'« „öÝô« Ê«
<KSNNF> <05C00000>
Printed in Japan
Imprimé au Japon
<CRD3997-B> ES
1. This unit
2. Velcro tape (hard)
3. Velcro tape (soft)
4. Car mat or chassis
1. Clamps
Clamps
1. Booster amp section
Decide on a suitable location for mounting
before removing the protective paper.
20 mm
20 mm
2. Antenna elements
Fig. 3
≥ qJA«
Fig. 5
µ qJA«
1. Window glass
1. Booster amp section
20 mm
2. Loading coil
3. Holder
4. Antenna top
1. Remove moisture, dust, dirt
and oil from where you are
going to stick on the seal.
2. Seal
3. Remove the protective
paper and stick on.
1. Remove the
protective
paper and stick
on.
2. Booster amp section
1. Antenna element
2. Holder
Fig. 1
± qJA«
Fig. 2
≤ qJA«
Fig. 4
¥ qJA«
1. Clamps
2. When mounting on a hatchback
window, use clamps where necessary
to assure the cable is not stretched or
does not cause an obstruction when
the hatch is opened or closed.
Fig. 6
∂ qJA«
Fig. 7
∑ qJA«
Fig. 8
∏ qJA«
Fig. 9
π qJA«
Fig. 10
±∞ qJA«
Fig. 11
±± qJA«
Fig. 12
±≤ qJA«
