Designed in Italy Assembled in China
Operating Mode
The PDA500P can work as a stand alone unit [Stand Alone Mode], where up to 8 preset can be recalled by
directly selecting them through the 8 positions encoder available on the front panel, or can work as completely
remotely controlled unit [Remote Control Mode].
As soon as is turned ON the device will load the currently selected preset, depending from the current
position of the Preset Eq encoder.
The Power Led will turn ON (Red) and the unit will be ready to work.
Stand Alone Mode
When the PDA500P is operating as stand alone unit, so running one of the 8 available presets, previously
created and stored within the unit with the remote control PC SW, the only available control are the 8 “preset
encoder”, allowing to select 1 of the 8 available presets previously stored through the PC SW Remote Control.
In Stand Alone Mode, the only indications of the “Activity” of the PDA500P in terms of running processes and
signal status, can be checked thanks to the Signal Led, indicating if Signal is present at the module Input and
the Limit Led indicating when on, if the DSP is dynamically compressing/Limiting the audio signal and indicating
an Input Clip condition when blinking.
The Input Signal can be sent to the unit through any one of the Male/Female XLR connectors.
The one not used can be used for mirroring the Input signal to an other unit.
The available potentiometer can help to control the Signal Input Level.
Remote Control Mode
When the PDA500P is operating as stand alone unit, so running one of the 8 available presets, previously
created and stored within the unit with the remote control PC SW, the only available control are the 8 “preset
encoder”, allowing to select 1 of the 8 available presets previously stored through the PC SW Remote Control.
In Stand Alone Mode, the only indications of the “Activity” of the PDA500P in terms of running processes and
signal status, can be checked thanks to the Signal Led, indicating if Signal is present at the module Input and
the Limit Led indicating when on, if the DSP is dynamically compressing/Limiting the audio signal and indicating
an Input Clip condition when blinking.
The Input Signal can be sent to the unit through any one of the Male/Female XLR connectors.
The one not used can be used for mirroring the Input signal to an other unit.
The available potentiometer can help to control the Signal Input Level.
PDA500P User Manual
