Designed in Italy Assembled in China
Overwiev
The PDA500P on the front panel offer the possibility
to select up to 8 presets, edited and uploaded on the
unit through a Rotary encoder.
The Presets can be created thanks a Pc Sw which
controls the unit via a RS485 interface.
The PDA500P can be put in network with twin
modules and controlled within a single Pc interface.
The PDA500P is a powerful Class D BiAmp module for
active cabinets, allowing the user to process the
Input signal with first class 24bit/96kHz DSP
processes, both for filtering purposes and dynamic
ones.
The all DSP processes can be accessed by the
cabinets' manufacturer for the specific acoustic
characterization of the cabinet itself,and by the user
for the application personalization.
For the Cabinets' manufacturers, 5 paramteric filters
(Peaker or Variable Q Shelving) are available on the
Input path of the signl, so as a RMS compressor
operating on both Low/High outputs, and fed by the
Low output path signal.
On the Low/High ways, Lp/Hp filters up to 48dB/Oct
are available, so as up to 15ms Delay, one firs/second
order All Pass filter for phase control purposes, 5
parametric filters (Peaker or Variable Q Shelving ),
RMS compressor and Clip Limiter.
The all processes available to the manufacturers
(Factory) are under Password.
On the PDA500P Panel, a Master Input Gain is
available for the simultaneous level control of the
input level control; 3 leds are indicating the Input
Signal presence, the Limiter activity and the Power
On/Off of the unit.
PDA500P User Manual
