Maquet COMPRESSOR MINI, User Manual

Page: 6 / 28

Connection
• The function check must always be carried
out before the unit is put into use, or once
a week when the unit is in continuous use.
• Make sure the mains power and gas fulfill
requirements for medical equipment.
• The Compressor Mini must only be
connected to a grounded outlet.
Operation
• When in use, the compressor must be
placed so that the air vents at the back and
on the underside are not covered.
• When in use, the drainage bottle must be
checked regularly.
• If the temperature alarm or the pressure
alarm is activated during operation, make
sure that a fully operational compressor is
connected as soon as possible.
Cleaning
The unit should be cleaned at least every 200
hours of operation or once a week when in
continuous use. If the compressor is used in
a dusty environment the dust filters must be
cleaned daily.
Service
• Service and repair must be carried out at
regular intervals by MAQUET-authorized
service personnel as follows:
5 000 hour preventive maintenance -
- 10 000 hour preventive maintenance
• Only original parts from MAQUET must be
used in the compressor.
Intended use
The intended use of the Compressor Mini is
to supply dry, filtered, compressed air for a
medical respiratory ventilator or anesthesia
machine that is compatible with the
specifications of the Compressor Mini. Its
capacity is approx. 30 l/min at 50 – 64 psi (350
– 450 kPa/3.5 – 4.5 bar).
Intended user
The Compressor Mini may be used only by
health care providers who have sufficient
training and experience.
4
COMPRESSOR MINI, User´s Manual
English version
28.0
1. Before use