Maquet COMPRESSOR MINI, User Manual

Page: 5 / 28

General information
This symbol on the unit means:
Attention, consult accompanying
documents.
The device complies with the
requirements of the Medical
Device Directive 93/42/EEC.
• The Compressor Mini may only be used by
authorized personnel. Users must have a
thorough knowledge of the unit and follow
the instructions in this Operating Manual.
• The owner or user is solely responsible for
safety if the equipment is not used as
intended, or has been serviced or repaired
by personnel not authorized by MAQUET.
• Documentation for the Compressor Mini
consists of:
Operating Manual -
- Service manual
- Spare parts list
- Installation instructions
KMP-034X
0
OUT
IN
• Remove the transport safety lock before
the compressor is used. Place it in the
transport safety lock holder.
• After unpacking the compressor, carry out
a function check.
• Pressure data for the Compressor Mini is
given in psi or kPa.
1 psi = 6,895 kPa
1 kPa = approx. 10 cm H
2
O
100 kPa = 1 bar ~ 1 atm ~ 1 kgf/cm
2
(kp/cm
2
)
• In addition to the Important information
here, always follow local and national
regulations.
• The central compressed air supply, when
connected to Compressor Mini, must not
exceed a pressure of 94 psi (650 kPa/6.5
bar).
COMPRESSOR MINI, User´s Manual
English version
28.0
3
1. Before use